高工作电压小瞬时电流耐压试验检测仪（耐电孤耐压试验检测仪）-（网络设备调控）

High voltage low current tester (arc resistance tester) - (computer control)

商商品称谓称：耐电弧试验机

Product name: electric arc resistance tester

企业产品机型：NDH-A

Product model: NDH - A

实现规格：GB/T 1411-2002《粉状耐压素材耐高压得很低瞬时电流弧光电池充电的耐压试验》（等同于IEC  61621-1997）及ASTM D495等标准单位的要规划生产制造的，并符合标准IEC 149、UL 746A等实验室检测工艺

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重要选用区间及模块：

本校正机是是以app于发电机、电子元件和家庭型电子元件等行业中的电工作业用材质、硅橡胶胶和耐压层电阻层电阻漆等耐压层电阻层电阻材质的耐弧光耐热性方面评比，主用在膏状耐压层电阻层电阻材质如：材质、聚酯薄膜、硅橡胶、矿石、瓷砖、磨砂玻璃、耐压层电阻层电阻油、耐压层电阻层电阻漆、硬纸板等导电介质的耐弧光耐热性方面测验；

本做研究的时候机由计算的机把控自动运行，能否出现所选研究状态下及研究日期，研究结速后并储存所选研究大数据，并可彩印.标准单位实验所评估。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为高低混合式构成，底端为运行装置，上端为实验设计箱。

2 本食品选购*新智能化调节枝术，顺利通过选购方式（IEC或ASTM）可半自动实施检测，并在租赁上显现做实验的时候操作过程和结杲。

3 **性优质，抗干拢技能强，软件测试要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断日期偏差：值为 ±10ms

2 调压器容积：2kVA

3 电机额定功率耐压线电压：12.5kV

4 耐压试验电阻可靠性强，精密度：±3%

5 工作电流掌控要求：±10%  电流大小校正精度等级：1.5%

6 探针对岩样有压力：（0.5±0.05）N

7 电极片原材料：钨棒

8 电极材料的距离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 操作工作环境平均温度：（23±2）℃

10 动用坏境温度湿度：（50±5）%

11 电：220V±5%  50Hz  10A

12 疲劳试验    具体方法：   行业标准/美标/10 mA 反复/20 mA 反复/30 mA多次/40 mA连继

13 疲劳试验系统程序相应：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 產品技术参数：

NDH-A    耐焊弧经过多次实验发现仪-微机把控

NDH-B    耐电孤实验仪-接触屏保持

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！